Installation Information

Installation Instruction Sheet - CLICK TITLE TO DOWNLOAD (File Size: 137KB)

Frame installation takes about five minutes. All frames are compatible with all standard bracket types including flat, tilt, and articulating arm brackets. No tools are required for installation.
1. Wall mount the television on the desired bracket type. If not using our supplied IR repeater skip to step 3.
2. IR repeater installation - First mount control module to rear of television using the supplied velcro self adhesive strip. Adjust the stem on the receiver (the black cable) so the eye is barely visible below the frame. On the opposite cable remove the adhesive backing from the white square emmiter and place over the TV's remote sensor.
3. Installing the frame - Unclip the anchor straps and hang the top two straps over the front of the frame. Slip the frame over the television. Ensure proper alignment with the screen and then clip the straps over the rear of the television and tighten for a secure fit.
4. Adjustments - If the vertical alignment of the frame is too low then you'll want to use the supplied mounting spacers to adjust the frame up. Up to a 1/8" overlap on all sides of the screen is intended by design.

 If you have any questions call 978-912-7132 for assistance.